Underfloor heating controls

Greenfloor controls are optimised for use with Greenfloor heating systems. The range of products includes wiring centres and components for individual room temperature control.

Room thermostats

Single room controls allow the temperature in each room to be set individually. The temperature is controlled by the thermostat in relation to variable factors such as solar heat gains, electrical devices and people. They are available as 230V wired controls or as wireless (RF) versions. Single room thermostats are available as wall mounted models. Wired programmable room thermostats are available as flush mounted models.

Wiring centres

Greenfloor wiring centres provide a quick, simple and safe means of wiring together room thermostats and actuators.

The wired unit can be used with up to six 230V room thermostats, or programmable room thermostats. It can also operate up to 14 actuators. There is the facility to connect a time control which enables a night set-back mode and an interlock to stop the manifold circulating pump from operating. It also turns off the heat source (when all valves are closed).

The wireless unit will receive signals from up to eight wireless thermostats and can be wired to a maximum of 16 actuators. The unit is supplied complete with a 7 day programmer that allows each zone to be programmed independently and works harmoniously with Worcester’s wireless (RF) room thermostat. To stop the manifold circulating pump running and turning off the heat source, the unit incorporates an interlock.

Actuators

The 230V actuators are supplied by the Greenfloor wiring centres and control the water flow through each zone, according to the room thermostat’s demand signal. They consume as little energy as just 2 Watts.