What are the key maintenance requirements for Greensource Air to Water Heat Pumps?
It will need servicing once a year by a qualified maintenance technician. The technician will need to check a number of things during the service, including:
- A temperature pressure relief valve is fitted ñ in line with G3 requirements for unvented cylinders
- Check the unit for signs of damage or corrosion
- Check the panels to ensure there is no vibration and that they are properly fastened
- All water connections must be checked for tightness or signs of leakage and the system water pressure must be checked
- The air path to and from the unit must be checked to ensure it is clear
- The heat pump water drain tray and the pipe to it must be checked to ensure it is clear and clean
The technician should then turn the unit on and check that:
- The controls are operating properly The water pump is free and operating properly
- The units fan is operating
- That the unit is increasing the water to the correct operating temperature
More All FAQs
- Why doesn't my EasyControl activate the heating when I have Smart Radiator Thermostats installed?
- Which rooms should I install the Smart TRV’s in?
- I already have a Wave control. Can I upgrade to an EasyControl?
- Can I program my hot water as well as my heating?
- Can I turn the home presence detection feature off and use my set timings instead?
- What happens with the data from my EasyControl?
- I don’t have a Worcester Bosch boiler. Can I still install a Bosch EasyControl?
- How many Smart TRVs can I connect to my heating system?
- How many devices can I connect to the EasyControl?
- How much is the EasyControl app?