Greenstar CDi FS Regular Professional

Greenstar CDi FS Regular overview

Our Greenstar FS CDi Regular is a perfect replacement for an older floor standing boiler in a larger property.

This boiler can be used with our range of high efficiency Greenstore cylinders allowing stored hot water to be rapidly replenished.

Features & Benefits

Floor mounting jig providing pre-plumbing and rear piping as standard	Fits underneath a standard kitchen worktop (worktop must be removable)	Roll-in boiler minimises the risk of damaging floors
Interior space optimised for serviceability	Simple boiler control knob with digital display and one button commissioning mode	Engineer menus to optimise commissioning and support servicing
Classic on-board diagnostic display	Built-in condensate pump	Optional flexible flue system that can be routed through a brick chimney
Scan and register the boiler using our FREE online registration app

Technical details

Part number: 7 731 600 102
ErP Efficiency Rating: A
ErP Data Sheet: ErP Data Sheet
Fuel Type: Gas (NG)
Control Options
EasyControl Compatible ¹
Solar Compatible
Central heating output (kW): 30
Dimensions (mm) height x width x depth: 850 x 400 x 600*
Clearances (mm) above, sides, below and front: 15, 5, 600 (fixed surface) & 25 (compartment door)
Maximum horizontal flue (mm): 4000
Maximum vertical flue (mm): 6400
Ingress protection rating: X4D
Wall mounting jig supplied
Minimum inlet pressure (bar): N/A
NOx emissions (mg/kWh): 33.3
Lift weight (kg): 55.1

Part number: 7 731 600 104
ErP Efficiency Rating: A
ErP Data Sheet: ErP Data Sheet
Fuel Type: Gas (NG)
Control Options
EasyControl Compatible ¹
Solar Compatible
Central heating output (kW): 41
Dimensions (mm) height x width x depth: 850 x 400 x 600*
Clearances (mm) above, sides, below and front: 15, 5, 600 (fixed surface) & 25 (compartment door)
Maximum horizontal flue (mm): 4000
Maximum vertical flue (mm): 6400
Ingress protection rating: X4D
Wall mounting jig supplied
Minimum inlet pressure (bar): N/A
NOx emissions (mg/kWh): 32.2
Lift weight (kg): 55.1

^* 630mm to front of flap

Related Accessories

Boiler Accessories	Part number
EasyControl Adapter	7 736 701 560				Installation Manual

Flashing Kits	Part number
Flat roof flashing kit (100mm & 125mm dia.)	7 716 191 090
Pitched roof flashing kit (100mm & 125mm dia)	7 716 191 091

Flue	Part number
1000mm extension kit (100mm dia.)	7 716 191 083
90º bend (100mm dia.)	7 716 191 084
Support bracket kit (100mm dia)	7 716 191 092
Short flue extension, 220mm (100mm dia)	7 716 191 133
60/100mm (x2) 45º bends	7 716 191 085
Horizontal flue kit (125mm dia.)	7 716 191 1572
Vertical BF kit (100mm dia.)	7 716 191 1562
Vertical BF kit (125mm dia.)	7 716 191 1582
RS telescopic flue kit (100mm dia.)	7 716 191 1552
80mm Flexible flue kit	7 716 191 1592
Flue Connector Vertical 60-100	7 716 191 164
Flue Connector Vertical 80-125	7 716 191 165
1000mm extension (125mm dia.)	7 719 003 666
45 degree bend (80/125mm dia.)	7 719 003 665
90º bend (125mm dia.)	7 719 003 664

Visit our dedicated literature section where you can search by product name, serial number and more.